Quality our habit, diligence our culture
Home About Us Products Quality Clients Photo Gallery Contact Us Enquiry  
Regent Hitech Industrial Vulves Check Valves Manufacturer Check Valves Suppliers Wafer Check Valves
Home » Our Products - Check Valves

Check Valves

The check valve is used when the flow is needed only in one direction. The quality of a check valve is that it gets closed automatically to stop back flow. These valves are used in wide variety of location. One of the important precaution at the time of installation is the check valve should be downstream the flow of water.

To have a genuine check valve of different types like:
Single plate check valves
Double Plate Check Valves
Swing Type Check Valves
Non Slam Disk Check Valves
Etc. trust our products.

Single Plate Check Vulves

Single Plate Check Vulves Manufacturer

Single Plate Check Valves (Wafer Type Check Valve)

Regent Wafer Type Check Valves has distinct advantages over conventional Swing Check Valves.
  • Stronger, Lighter and Smaller size. It weights about 1/8yh weight of conventional valve.
  • Structurally Sound
  • Hydraulically Engineered.

Can be installed in horizontal or in vertical line without any special pipe support. The light weight and short face-to-face dimension of valve makes it easy to install between standard gaskets and line flanges.

Body and Plates : C.I./C.S./S.S-304, 316/AI. Bronze to ASTM A-126 Gr. B, A-216 GR WCB/CF8M, or any other alloy as per Buyer’s Specifications.

Hing Pin : C.S./S.S. or Buyer’s Specifications.

Seal : Nitrile, Neoprene, EPDM,Viton-A or Metal to Metal.

End Facing : Plain face, Raised Face or Ring Joint Facing

Application : The value is suitable for all types of fluids. Buyers must specify the service condition for selection of suitable material of construction.

NB mm A B C
40 21 83 26
50 21 95 39
65 21 108 48
80 21 130 56
100 21 156 82
125 21 186 100
150 21 208 125
200 21 266 164
250 28 325 201
300 28 365 225
350 34 432 270
400 36 495 294
450 36 535 320
500 55 600 346
600 55 710 396

Check Vulves

Dual Plate Check Valves

Dual Plate Check Valves
  • Dual Plate Check Valves are light in weight thus easier handling and self supporting.
  • More compact & structurally sound design.
  • Can be installed horizontally or vertically.
  • Only Check Valve which can be installed for flow upside down due to spring assisted closure.
  • Low Pressure Drop and reduced Energy Loss irrespective of Pressure Ratings.
  • Streamlined flow way.
  • Efficient and Positive sealing under most flow and pressure conditions. Valve closes before flow reversal at zero velocity.
  • Inherently Non-Slamming.   No external devices /attachments required.
  • Water Hammer almost non-existent.
  • Long life and trouble -free operation.

The Dual Plate Check Valves is the most versatile design available in specific materials of construction to suit particular Pressure, Temperature and Fluid Flow Characteristics. Some of the Typical Applications are as follows :

Water Supply Systems, Fire Water Systems, Cooling Water, Chilled /Hot Water Systems, Boiler Feed Water, Sea Water, Potable Water, Raw Water etc.

All applications

Oil & Gas
Onshore/ Offshore, Petroleum, Lubricating oil, Hydraulic oil, Edible Oils, LPG, Sour Gas, Low Temperature Applications etc.

Air & Gases
All Gases like Chlorine, Hydrogen, Nitrogen, Carbon Dioxide (CO2) etc.

Metallurgical & Chemical processes
Sugar, Pharmaceutical, Paper, Cement, Steel, Aluminium, Copper, Zinc, Power and other Industries.

Dual Plate Check Valves Supplier

Dual Plate Check Valves

Disc Check Valve
Disc Check Valve Features :

Investment Casting Construction
Compact & Rugged Design
Stronger, Lighter and Smaller than Conventional Swing Check Valve, 
Hence Less Expensive to Install and Maintain
Single Disc Type
Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines
Easy To Installation between Two Pipe Flanges
Metal To Metal or Soft Seat option
Maintenance Free Design
Zero Leakage (In Soft Seat)
Full Port Opening
Wafer, Flangeless, Sandwich Type

Disc Check Valve Design & Testing International Standard :
Design Standard : Mfg. Standard
Testing Standard : API 598
End Connection : Wafer Type, Flangeless, Sandwich Type, Suitable To Mount

: Between ANSI B 16.5/BS 10 Table/ DIN / IS / JIS Standard Flange
Rating : 150# to 300# / PN 16 to PN 40
Size Range : ½" to 4" (DN15 to DN100)

Disc Check Valve Material of Construction :
Body, Cover & Hinge Lever : Cast Carbon Steel to ASTM A 216 GR. WCB S.S. 304 / 316 / 304L / 316L

: Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M

Spring & Circlip : S.S. 304 / 316 / 304L / 316L

Soft Seat : EPDM, EPDM Food Grade, Buna - N, Black Nitrile, Neoprene,

: Hypalon ®, Silicon, Viton ®, P.T.F.E.

Dual Plate Check Valves

SWING CHECK VALVE - 150# / 300#
Technical Data :
Manufacturing Std. : BS 1868 / API 6D
Face to Face : ASME B16.10
End Connection : Flanged Ends to

Inspection and Testing Std. : BS 6755 ( Part - 1 )

Test Pressure
Hydraulic Pneumatic

150 # 300 #
Body 425 PSIG 1100 PSIG
Back Seat 300 PSIG 800 PSIG
Seat 300 PSIG 800 PSIG 80 PSIG

Nomenclature Material
Lifting Eye Bolt Carbon Steel
Cover Nuts ASTM A194 Gr. 2H
Cover Studs. ASTM A193 Gr. B7
Cover Gasket Asbestos Filler SS 304 Sprial Wounded / CAF
Plug (Not Shown) Carbon Steel
Hinge Pin AISI 410
Cotter Pin AISI 304
Disc Washer AISI 304 / AISI 410
Disc Retaining Nut AISI 304
Disc ASTM A217 Gr. Ca15 / WCB + 13 Cr. Facing
Seat Ring AISI 410 / ASTM A217 Gr. Ca15
Hinge ASTM A216 Gr.WCB
Cover ASTM A216 Gr.WCB
Body ASTM A216 Gr.WCB
Dual Plate Check Valves Supplier

knife gate valves manufacturers

Our Products

Quality Policy

REGENT HITECH PRIVATE LIMITED is committed to providing Total Customer Satisfaction through Consistency in Quality Products, Timely Delivery at Competitive Price by adopting Continual Improvement in Quality Management Systems.

Regent Hitech Valves Manufacturer CompanyContact Persons

Mr. Sanjay Mishra(Director)
Mr. Manuuj Kathuriaa (Director)


knife gate valves india
About Us | Products | Quality | Clients | Photo Gallery | Contact Us | Enquiry